UnlimiPocket

Ramp Calculator

Find the ramp length and landings you need for a given height and slope (ADA 1:12).

–Ramp run (ft)
–Ramp surface length (ft)
–Angle (°)
–Landings needed (every 30 in of rise)

What is the Ramp Calculator used for?

Use it to calculate ramp length and slope.

When to use it

About this tool

The Ramp Calculator works out ramp run, ramp surface length, angle and landings needed from a few simple inputs. Type height to climb and slope ratio and the results update instantly as you change any number – there is no button to press and nothing to install.

How to use it: start with the example values already filled in to see how the ramp calculator behaves, then replace them with your own figures. Every field accepts decimals, and you can change one value at a time to compare scenarios side by side.

Results are rounded for readability, so treat them as a reliable estimate rather than an official figure. Always confirm quantities with your supplier and check local building codes before you buy materials or build.

Frequently asked questions

How does the ramp calculator work?

It uses standard formulas to turn height to climb and slope ratio into ramp run, ramp surface length and angle. The calculation reruns every time you change an input.

Is the ramp calculator free?

Yes. The ramp calculator on UnlimiPocket is completely free, with no sign-up, no usage limits and no watermarks.

Is my data uploaded anywhere?

No. Everything is calculated in your browser on your own device. Nothing you type or open is sent to our servers.

Related tools